Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 6 (click to view)
Names of Things and What They Do
fig.01
7
8
9
10
11
1
3
2
4
5
6
12
1. INPUT Jack
Connect your guitar here.
EQUALIZER
7. BASS
Adjusts the tone quality of the lower range.
2. SELECT Switch
Switches you between the CLEAN and LEAD channels. You can confirm which channel is selected by checking the indicator's color (CLEAN: green; LEAD: red).
8. MIDDLE
Adjusts the tone quality of the midrange.
CLEAN Channel
3. VOLUME Knob
Adjusts the CLEAN channel volume. When you use external effects, CLEAN channel would be more suitable than LEAD channel. Please connect external effects between your guitar and input
9. TREBLE
Adjusts the tone quality of the upper range.
10. AUX IN Jack
You can connect a CD player or other kind of device and have it play along with your guitar. This accepts a 1/4" stereo phone plug. However, the speaker and RECORDING OUT/PHONES output is monaural. * Determine the volume level by adjusting the volume control of the connected device.
LEAD Channel
4. TYPE Switch
You can select from the following four types of distortion:
11. RECORDING OUT/PHONES Jack
fig.02
OVERDRIVE
Natural distortion sound similar to that obtained by turning the amp volume up completely
When Using RECORDING OUT
Use mono 1/4" phone plugs when connecting to this jack. Volume level of RECORDING OUT can be easily adjusted if you set the VOLUME knob of CLEAN or LEAD channel shown as right side.
DISTORTION
Harder distortion than OVERDRIVE
METAL
Even harder and heavier than DISTORTION, which can get long sustained note.
When Using Headphones
Connect headphones to this jack. * No sound is played through the unit's speaker while the RECORDING OUT/PHONES jack is in use.
METAL STACK
Very fat sound as if sounded by stacked speaker cabinet of METAL.
5. GAIN Knob
Adjusts the LEAD channel's distortion level.
12. POWER Switch
Turns the power on and off. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
